|
Physical
Characteristics
Length:
180 mm (7”)
Length Standard cable: 1.8 m (70”)
Width at handle: 33 mm (1.3”)
Width at head: 64 mm (2.5”)
Weight without cable: 1800 SR/PDF:145g (5.1 oz)
Weight without cable: 1800 ST: 165g (5.8 oz)
Case: high-impact ABS self-extinguishing plastic. Rubber end cap
and boot.
Power
Supply:
+5VDC +-10% current consumption approx. 150mA, depending on
configuration
Special Features: Firmware updates via flash memory,
programmable data format (code identification, preambles and
postambles, intercharacter and intermessage delays, variable
time-out, and many others)
Flash memory: 1800 SR & PDF Optics: CCD linear image
sensor with sharp aiming beam. Light source: red, long life LEDs
1800 ST Optics: visible laser diode @ 670nm. Laser Class 2 IEC
825 / CDRH
Class II
Operator Feedback: Green good read LED. Adjustable beeper
Hardware
Microprocessor: Custom
chip (ASIC inc. DSP processor) for fast signal processing and
decoding. Special routines for PDF 417.
Interfaces: All scanners support (by choice of cable):
Wand & Laser emulation, single or dual RS232, IBM 46xx, OCIA and
PC AT/PS2 wedge to over 400 terminals and PCs. Extensive
interface information on application
Bar Code
Symbologies
All models: UPC E, A, EAN, Code 39; Interleaved, Matrix,
Industrial and Standard 2 of 5; Code 128, UCC EAN 128, Codabar,
Code 93, MSI, Plessey.
1800 PDF: PDF417
Scanning
Performance
Performance:
1800 SR and PDF
Scan rate: 400
scans per sec. max (SR); 600 scans per sec. max (PDF)
Minimum X dimension: 0.1 mm (4 mil)
Depth of field*: 0 to 10 cm (4”) depending on code:
0 .1 mm (4 mil): 0-2 cm (0-0.8”)
0.254 mm (10 mil): 0-4 cm (0-1.6”)
100% EAN /UPC: 0-5.5 cm (0-2.1”)
0.38 mm (15 mil): 0-6 cm (0-2.4”)
0.5mm (20 mil): 0-7 cm (0-2.7”)
0.7 mm (27 mil): 0-10 cm (0-4”)
*Only applies to SR Model
PCR: 25%
minimum
Code Width: 12 cm (4 in.) max (X above .254 /10 mil)
Skew: +- 65°
Pitch: +- 70°
Performance: 1800 ST
Scan rate: 36 s/sec
Minimum X dimension: 0.125 (5 mil)
Depth of field: up to 50cm (20”) depending on code:
0.125 mm (5 mil): 2.5-8 cm (1-3”)
0.254 mm (10 mil): 0-20 cm (0-7.9”)
100% EAN /UPC: 0-25 cm (0-10”)
0.38 mm (15mil): 0-30 cm (0-12”)
0.5 mm (20 mil): 0-50 cm (0-20”)
PCR: 25%
minimum
Code Width:
Skew: +- 55°
Pitch: +- 65°
Bar Code
Scanning Module Options
Setup options include EasySet® PC Windows™ software,
by direct connection, setup bar code printing (custom setup
utility) or by conventional bar code setup manual.
Accessories
Desk/vertical holder (standard)
Raised hands-free stand (option)
Environment
Operating
Temperature: 0° to 40°C (32° to 104°F)
Storage Temperature: -25° to 60°C (-13° to 140°F)
Humidity: 10% to 90% non-condensing
Drop Survival: withstands multiple drops of 1m (3.2 ft) to
commercial flooring
Regualtory Approvals
1800 ST only:
US DHHS
Standard 21 CFR 1040, 10 and 1040,11 (1994) as a Class II Laser
product, IEC 825-1 (1993) & EN 60825-1 (1994) Class 2.
All models:
Complies with FCC Part 15, CE
Directives 89/336/EEC, 72/23/EEC and Low Voltage Directive EN
60742 (1995).
|
