These new cordless scanners utilize the latest “Linear Imager” technology that provides “laser-like” distance reading at CCD prices. Both the LI101-RF and the LI102-RF are capable of operating up to 100 feet from their Base Station. The Base Station attaches to the host computer via either keyboard, serial port or USB.

Both the LI101-RF and the LI102-RF have incredible scanning distance - up to 11” away from a typical UPC Code (not to be confused with the 100 ft transmission range from the scanner to the base station!).

These scanners easily rival higher-priced Laser scanners in the distance category and out-perform other CCD Scanners by reading almost any width bar code from quite a distance away! With the LI101-RF and the LI102-RF, the constraints usually associated with a CCD scanner (no distance scanning) are gone - you get laser-like performance from a CCD! Check out the comparison chart of our LI101/102 scanners versus lasers...we think you'll be surprised!

About our RF Linear Imager CCD Scanners...

Key features of our 2-Way RF LI202 Scanner:

• RF Range is up to 100 feet

• Base attaches as 2nd keyboard or to a serial port

• USB Support with Wedge Saver

• 1-8 CCD's per Base (compare to 1-Way model)

• Four frequencies available

• Ideal for shipping/receiving

• Scanner uses 4 AA batteries in the handle

• 50,000 Scans on one set of Alkaline batteries

• Approved for FCC license free operation in the USA or Canada

• Special European models available for Germany, France, and UK

• 2 Year Warranty

• Made In USA

. Key features of our 1-Way RF LI101 Scanner:

• RF Range is up to 100 feet

• Base attaches as 2nd keyboard or to a serial port

• USB Support with Wedge Saver

• Only 1 CCD per Base (compare to 2-Way model)

• Four frequencies available

• Ideal for shipping/receiving

• Scanner uses 4 AA batteries in the handle

• 70,000 Scans on one set of Alkaline batteries

• Approved for FCC license free operation in the USA or Canada

• Special European models available for Germany, France, and UK

• 2 Year Warranty

• Made In USA

RF Linear Imager CCD Scanner and Base Models

The Base connects either to the keyboard, serial port, or USB port of the host computer. The LI102-RF can operate up to 100 feet from the Base Station, and four frequencies are available.

B68/B58 2-Way RF CCD Base Station
The 2-Way RF CCD Base Station is available in both a serial interface model (B58) or a keyboard wedge interface model (B68). The B68 model can also be used with the USB Wedge Saver for USB interface on a PC or Macintosh. Up to 8 RF Laser Scanners can talk to one B68 or B58 base station using collision detect and retry logic.

The LI101-RF 1-Way RF CCD Scanner is a 1-Way RF scanner - a beep occurs at the Base Station only, requiring you to stay within hearing range of the Base. You can use only one LI101-RF CCD Scanner per base station. Up to four frequencies are available allowing up to four scanner/base pairs in an area

B62/B52 1-Way RF CCD Base Station
The 1-Way RF Laser Base Station is available in both a serial interface model (B52) or a keyboard wedge interface model (B62). The B62 model can also be used with the USB Wedge Saver for USB interface on a PC or Macintosh. Only 1 Laser is allowed per base station. The confirming beep is heard only at the base station, requiring the user to remain within hearing distance if necessary.

RF CCD Specifications

Special Key Emulation

All Characters, Function Keys F1-F12, Ctrl, Alt, Shift, Home, End, PgUp, PgDn, Arrows

Protocols

Half Duplex, Full Duplex, Xon/Off, ACK/NAK, RTS/CTS

RS-232 Options

600 - 38,400 Baud Rate, Odd, Even, or None Parity, 7 or 8 Data Bits, 1 or 2 Stop Bits

Configuration

Wanding supplied menu - stored in non-volatile EEPROM memory.

Auto Discrimination of Bar Codes

Code 39, UPC/EAN (supplements too!), Codabar, Interleaved 2 of 5, 128, 2 of 5 , MSI, Plessey, Code 93, and Full ASCII Code 39

Character Filter

Selective filtering of characters

Accumulate Mode

Allows the wanding of variable data which is accumulated in reader until a bar code is wanded without a leading space.

Preamble and Postamble

From 0-15 Characters to be transmitted in front or at end of each bar code read.

Terminator Characters

Select Enter, TAB, or nothing (for fill-the-field)

Beeper

Variable Volume and Tone, External Speaker Jack

Check Digits

Optional Transmission for all codes. Optional Checking for Code 39, I 2 of 5 and MSI

UPC Options

Compressed or Expanded UPC-E. Optional suppressed transmission of Check Digits and Number System Character

Physical Base

Size: 6 1/2" x 4 1/2" x 1"; Weight: 12 oz.; Operating Environment: 32-120 degrees F

Frequencies Available

In Canada and the USA: Black: 49.8375 MHz, Orange: 49.8525 MHz, Red: 49.8675 MHz, Yellow: 49.8825 MHz

Warranty

2 Year Warranty on Laser and Decoder. 30 Day Money Back Guarantee